ItirubTransmitter DIGITAL – RS485
This device can perform measurement on Digital Optoisolated sensors, output activation through relay, remote command and transmit the collected data through RS485 communication.
ItirubTransmitter
It is a versatile device, composed of hardware and software, created to work
without interruptions, to serve remote areas and environments with difficult access, simplifying the measurement of sensors, and data transmission through “RS485” connections.
.
Measurement
Featuring multiple digital inputs and outputs for monitoring and triggering sensors and triggering the relay output and remote commands based on the status of the I/O input and alerts when measuring sensors, the acquired data can be displayed on panels, and is compatible with the main cloud monitoring systems on the market.
Energy consumption
Equipment with low energy consumption, can be powered by an internal battery, recharge can be carried out through small solar panels or (source) DC connected to the device.
Care and precautions
The ItirubTransmitter is intended for professional use, and must be handled by trained professionals, qualified in the installation, configuration and operation, use only power supplies following the specifications contained in the manual, to power the ItirubTransmitter.
Datasheet
| Comunication Interface | |||
| Description | ItirubTransmitter Digital - RS485 | ||
| Pattern | TIA-485 | ||
| baud rate | 1200, 9600 ou 115200 | ||
| Sercuity | Físico PTP | ||
| Comunication Mode | Cliente Servidor |
||
| Connection | Terminal Plug removíveis | ||
| Protocol | MODBUS RTU | ||
| Unique identifier | Mac Address | ||
| Sensor Interface | |||
| Description | Digital | ||
|
Channels |
4 x Entrada Opto
4 x Entrada Opto e 2 x Saída Relé |
||
| Loop Power | 24V Max 50mA | ||
| Connection | Terminal plug 21P removível | ||
| measuring range | Acionamento Min 3v Max 24v |
||
| Precision | --- | ||
| Trigger Interval | Saída relé Max 250v |
||
| Connection RS485 | 1xRS485 | ||
| Electrical and Signaling | |||
| Leds status | Power, Bateria, Ethernet, Wifi, LoRa e RS485 | ||
| Power Supply | 5 a 10Vdc | ||
| Solar panel | VOC 6, 500mA *Opcional* | ||
| Internal Batttery | Li-lon 3.6Vlts *Opcional* | ||
| Internal Temperature | Sensor for measuring the internal temperature of the ItirubTransmitter | ||
| Level Battery | Sensor for measuring the ItirubTransmitter internal battery level | ||
| Programming Connector | SWD programming connector with 10-pin 1.27mm interface | ||
| Settings | Micro USB connection for file storage and Firmware configuration. | ||
Itens Inclusos
| ItirubTransmitter Digital - RS485 |
| 01 Cabe USB |
| 01 Font 5V |
| 01 Terminal plug removable |
| 01 Fixing Clamp |
